GoE Charger

Aus FHEMWiki

Der GoE-Charger ist eine WallBox des österreichischen Herstellers go-e (geründet 2015). Derzeit (2024) sind verschiedene Modelle im Angebot:

  • go-e Charger Gemini - WallBox mit 11 oder 22 kW Ladeleistung
  • go-e Charger Gemini Flex - mobile Version des obigen Gerätes zum Anschluss an eine vorhandene Kraftstromsteckdose
  • go-e Charger Gemini 2.0 - Variante des obigen Gerätes mit integrierter SIM-Karte für mobilen Datenzugriff
  • go-e Charger Gemini Flex 2.0 - mobile Version des obigen Gerätes zum Anschluss an eine vorhandene Kraftstromsteckdose

Einbindung via HTTPMOD

Die Abfrage und Steuerung erfolgen über das HTTPMOD-Modul, welches im Regelfall einmal pro Minute auf die wichtigsten Daten der Wallbox zugreift (auch manuell abrufbar als "get Wally status").

Basisdefinition

Benötigt wird dazu die IP-Adresse der Wallbox im lokalen Netzwerk, die in den nachfolgenden Code einzusetzen ist. Das Device heißt im Beispiel einfach Wally

Code:
defmod Wally HTTPMOD http://<IP-Adresse der Wallbox>/api/status?filter=acu,alw,car,cus,err,eto,modelStatus,tma,tpa,trx,wh 60
attr Wally cmdIcon on:general_an off:general_aus
attr Wally devStateIcon disabled.*:ev_car_charger@darkgrey not_allowed.*:ev_car_charger@white ready_no_car.*:ev_car_charger@blue charging_car.*:ev_car_charger@darkorange wait_for_car.*:ev_car_charger@pink finished.*:ev_car_charger@green error.*:ev_car_charger@red
attr Wally enableControlSet 1
attr Wally event-on-change-reading .*
attr Wally event-on-update-reading alw,LAST_ERROR
attr Wally eventMap /charge_allowed yes:on/charge_allowed no:off/
attr Wally extractAllJSON 0
attr Wally get01Name status
attr Wally get01URL http://%goeIP%/api/status?filter=acu,alw,car,cus,err,eto,modelStatus,tma,tpa,trx,wh
attr Wally get02Name settings
attr Wally get02Poll 1
attr Wally get02PollDelay 3600
attr Wally get02URL http://%goeIP%/api/status?filter=acs,ama,amp,amt,ate,cbl,cco,clp,dwo,fna,fup,lck,lmo,pha,psm,spl3,upo,ust,acu,alw,car,cus,err,eto,modelStatus,tma,tpa,trx,wh
attr Wally get03Name energy_details
attr Wally get03URL http://%goeIP%/api/status?filter=fhz,nrg,pvopt_averagePGrid,pvopt_averagePPv,pvopt_averagePAkku
attr Wally get04Name led_details
attr Wally get04URL http://%goeIP%/api/status?filter=lbr,lse,cid,cwc,cch,cfi
attr Wally get05Name goe_details
attr Wally get05URL http://%goeIP%/api/status?filter=sse,fwv,typ
attr Wally group energyControl
attr Wally oldreadings energy
attr Wally reading01JSON alw
attr Wally reading01Name charge_allowed
attr Wally reading01OMap 0:no, 1:yes
attr Wally reading02JSON trx
attr Wally reading02Name transaction
attr Wally reading03JSON tpa
attr Wally reading03Name power
attr Wally reading03OExpr (ReadingsVal("Wally","car",0) =~ /charging/)?sprintf("%.3f",$val/1000):0
attr Wally reading04JSON wh
attr Wally reading04Name energy
attr Wally reading04OExpr sprintf("%.3f",$val/1000)
attr Wally reading05JSON tma_0
attr Wally reading05Name temperature_box
attr Wally reading06JSON tma_1
attr Wally reading06Name temperature_cable
attr Wally reading07JSON acu
attr Wally reading07Name current_allowed
attr Wally reading08JSON ama
attr Wally reading08Name current_limit
attr Wally reading09JSON clp
attr Wally reading09Name current_limitPresets
attr Wally reading09RecombineExpr join ",", @matchlist
attr Wally reading10JSON amp
attr Wally reading10Name current_requested
attr Wally reading11JSON modelStatus
attr Wally reading11Name charge
attr Wally reading11OMap 0:NotChargingBecauseNoChargeCtrlData, 1:NotChargingBecauseOvertemperature, 2:NotChargingBecauseAccessControlWait,3:ChargingBecauseForceStateOn, 4:NotChargingBecauseForceStateOff, 5:NotChargingBecauseScheduler, 6:NotChargingBecauseEnergyLimit, 7:ChargingBecauseAwattarPriceLow, 8:ChargingBecauseAutomaticStopTestLadung, 9:ChargingBecauseAutomaticStopNotEnoughTime, 10:ChargingBecauseAutomaticStop, 11:ChargingBecauseAutomaticStopNoClock, 12:ChargingBecausePvSurplus, 13:ChargingBecauseFallbackGoEDefault, 14:ChargingBecauseFallbackGoEScheduler, 15:ChargingBecauseFallbackDefault, 16:NotChargingBecauseFallbackGoEAwattar, 17:NotChargingBecauseFallbackECO, 18:NotChargingBecauseFallbackAutomaticStop, 19:ChargingBecauseCarCompatibilityKeepAlive, 20:ChargingBecauseChargePauseNotAllowed, 21:NotChargingBecauseSimulateUnplugging, 22:NotChargingBecausePhaseSwitch, 23:NotChargingBecausePhaseSwitch, 24:NotChargingBecauseMinPauseDuration
attr Wally reading12JSON modelStatus
attr Wally reading12Name charge_num
attr Wally reading13JSON car
attr Wally reading13Name car_num
attr Wally reading14JSON car
attr Wally reading14Name car
attr Wally reading14OMap 0:unknown,1:idle,2:charging,3:wait,4:finished,5:error
attr Wally reading15JSON err
attr Wally reading15Name error_num
attr Wally reading16JSON err
attr Wally reading16Name error
attr Wally reading16OMap 0:none, 1:FiAc, 2:FiDc, 3:Phase, 4:OverVolt, 5:OverAmp, 6:Diode, 7:PpInvalid, 8:GndInvalid, 9:ContactorStuck, 10:ContactorMiss, 11:FiUnknown, 12:Unknown, 13:OverTemp, 14:NoComm, 15:LockStuckOpen, 16:LockStuckLocked
attr Wally reading17JSON sse
attr Wally reading17Name goe_serial
attr Wally reading18JSON fwv
attr Wally reading18Name goe_firmware
attr Wally reading19JSON typ
attr Wally reading19Name goe_device
attr Wally reading20JSON acs
attr Wally reading20Name charge_auth
attr Wally reading20OMap 0:open,1:authentication
attr Wally reading21JSON psm
attr Wally reading21Name phase_switchmode
attr Wally reading21OMap 0:auto, 1:force_1, 2:force_3
attr Wally reading22JSON spl3
attr Wally reading22Name phase_switchlevel
attr Wally reading23JSON pvopt_averagePGrid
attr Wally reading23Name power_grid_av
attr Wally reading23OExpr (ReadingsVal("Wally","charge_mode",0) eq "eco")?sprintf("%.1f",$val/1000):"-"
attr Wally reading24JSON pvopt_averagePPv
attr Wally reading24Name power_pv_av
attr Wally reading24OExpr (ReadingsVal("Wally","charge_mode",0) eq "eco")?sprintf("%.1f",$val/1000):"-"
attr Wally reading25JSON pvopt_averagePAkku
attr Wally reading25Name power_battery_av
attr Wally reading25OExpr (ReadingsVal("Wally","charge_mode",0) eq "eco")?sprintf("%.1f",$val/1000):"-"
attr Wally reading27JSON amt
attr Wally reading27Name temperature_limit
attr Wally reading28JSON fna
attr Wally reading28Name name
attr Wally reading29JSON lmo
attr Wally reading29Name charge_mode
attr Wally reading29OMap 3:default,4:eco,5:nexttrip
attr Wally reading30JSON dwo
attr Wally reading30Name energy_stop
attr Wally reading30OExpr ($val =~ /\d+/)?sprintf("%.1f",$val/1000):"no"
attr Wally reading31JSON cco
attr Wally reading31Name nexttrip_energy_100km
attr Wally reading32Format %2.1f
attr Wally reading32JSON ate
attr Wally reading32Name nexttrip_energy
attr Wally reading32OExpr $val/1000
attr Wally reading33JSON ust
attr Wally reading33Name lock_setting
attr Wally reading33OMap 0:while_car_present, 1:while_charging, 2:always
attr Wally reading34JSON lck
attr Wally reading34Name lock_mode
attr Wally reading34OMap 0:normal, 1:auto_unlock, 2:always, 3:force_unlock
attr Wally reading35JSON upo
attr Wally reading35Name lock_powerout
attr Wally reading35OMap 1:unlock, 0:no_unlock
attr Wally reading36JSON cus
attr Wally reading36Name lock
attr Wally reading36OMap 0:unknown, 1:unlocked, 2:unlock_failed, 3:locked, 4:lock_failed, 5:unlock_powerout
attr Wally reading37JSON cus
attr Wally reading37Name lock_num
attr Wally reading40JSON nrg
attr Wally reading40Name voltage_L1_L2_L3_N
attr Wally reading40RecombineExpr sprintf "%.1f - %.1f - %.1f - %.1f",$matchlist[0],$matchlist[1],$matchlist[8],$matchlist[9]
attr Wally reading41JSON nrg
attr Wally reading41Name current_L1_L2_L3
attr Wally reading41RecombineExpr sprintf "%.1f - %.1f - %.1f ",$matchlist[10],$matchlist[11],$matchlist[12]
attr Wally reading42JSON nrg
attr Wally reading42Name power_L1_L2_L3_N_t
attr Wally reading42RecombineExpr sprintf "%.1f - %.1f - %.1f - %.1f - %.1f",$matchlist[13],$matchlist[14],$matchlist[15],$matchlist[2],$matchlist[3]
attr Wally reading43JSON nrg
attr Wally reading43Name phaseF_L1_L2_L3_N
attr Wally reading43RecombineExpr sprintf "%.1f - %.1f - %.1f - %.1f",$matchlist[4],$matchlist[5],$matchlist[6],$matchlist[7]
attr Wally reading44Format %.2f
attr Wally reading44JSON fhz
attr Wally reading44Name frequency
attr Wally reading45Format %.3f
attr Wally reading45JSON eto
attr Wally reading45Name energy_total
attr Wally reading45OExpr $val/1000
attr Wally reading46Name phases
attr Wally reading47JSON fup
attr Wally reading47Name charge_pvSurplus
attr Wally reading47OMap 0:no,1:yes
attr Wally reading48JSON frc
attr Wally reading48Name forceState
attr Wally reading48OMap 0:neutral, 1:off, 2:on
attr Wally reading51JSON lbr
attr Wally reading51Name led_brightness
attr Wally reading52JSON lse
attr Wally reading52Name led_ecomode
attr Wally reading52OMap 0:no, 1:yes
attr Wally reading53JSON cid
attr Wally reading53Name led_colorIdle
attr Wally reading53OExpr substr $val,1
attr Wally reading54JSON cwc
attr Wally reading54Name led_colorWaitcar
attr Wally reading54OExpr substr $val,1
attr Wally reading55JSON cch
attr Wally reading55Name led_colorCharge
attr Wally reading55OExpr substr $val,1
attr Wally reading56JSON cfi
attr Wally reading56Name led_colorFinished
attr Wally reading56OExpr substr $val,1
attr Wally replacement70Mode text
attr Wally replacement70Regex %goeIP%
attr Wally replacement70Value <IP-Adresse>
attr Wally set01IMap null:no, 0:yes, 1:card_0
attr Wally set01Name charge_allowed
attr Wally set01URL http://%goeIP%/api/set?trx=$val
attr Wally set02IMap 0:open,1:authentication
attr Wally set02Name charge_auth
attr Wally set02URL http://%goeIP%/api/set?acs=$val
attr Wally set04Hint slider,6,1,16
attr Wally set04Max 16
attr Wally set04Min 6
attr Wally set04Name current_requested
attr Wally set04URL http://%goeIP%/api/set?amp=$val
attr Wally set05IExpr ($val =~ /\d+/)?$val*1000:"null"
attr Wally set05Name energy_stop
attr Wally set05URL http://%goeIP%/api/set?dwo=$val
attr Wally set06Format %2.1f
attr Wally set06IExpr $val*10*ReadingsVal("Wally","nexttrip_energy_100km",0)
attr Wally set06Name nexttrip_distance
attr Wally set06URL http://%goeIP%/api/set?ate=$val
attr Wally set07Name nexttrip_energy_100km
attr Wally set07URL http://%goeIP%/api/set?cco=$val
attr Wally set08IMap 0:while_car_present, 1:while_charging, 2:always
attr Wally set08Name lock_setting
attr Wally set08URL http://%goeIP%/api/set?ust=$val
attr Wally set09IMap true:unlock, false:no_unlock
attr Wally set09Name lock_powerout
attr Wally set09URL http://%goeIP%/api/set?upo=$val
attr Wally set10IMap 3:default,4:eco,5:nexttrip
attr Wally set10Name charge_mode
attr Wally set10URL http://%goeIP%/api/set?lmo=$val
attr Wally set11IMap 0:auto,1:force_1,2:force_3
attr Wally set11Name phase_switchmode
attr Wally set11URL http://%goeIP%/api/set?psm=$val
attr Wally set12Name phase_switchlevel
attr Wally set12URL http://%goeIP%/api/set?spl3=$val
attr Wally set13Name goe_reboot
attr Wally set13NoArg 1
attr Wally set13URL http://%goeIP%/api/set?rst="true"
attr Wally set20Max 255
attr Wally set20Min 0
attr Wally set20Name led_brightness
attr Wally set20URL http://%goeIP%/api/set?lbr=$val
attr Wally set21IMap true:yes,false:no
attr Wally set21Name led_ecomode
attr Wally set21URL http://%goeIP%/api/set?lse=$val
attr Wally set22FollowGet led_details
attr Wally set22Name led_colorIdle
attr Wally set22TextArg 1
attr Wally set22URL http://%goeIP%/api/set?cid="%23$val"
attr Wally set23FollowGet led_details
attr Wally set23Name led_colorWaitcar
attr Wally set23TextArg 1
attr Wally set23URL http://%goeIP%/api/set?cwc="%23$val"
attr Wally set24FollowGet led_details
attr Wally set24Name led_colorCharge
attr Wally set24TextArg 1
attr Wally set24URL http://%goeIP%/api/set?cch="%23$val"
attr Wally set25FollowGet led_details
attr Wally set25Name led_colorFinished
attr Wally set25TextArg 1
attr Wally set25URL http://%goeIP%/api/set?cfi="%23$val"
attr Wally set47IMap true:yes, false:no
attr Wally set47Name charge_pvSurplus
attr Wally set47URL http://%goeIP%/api/set?fup=$val
attr Wally set48IMap 0:neutral, 1:off, 2:on
attr Wally set48Name forceState
attr Wally set48URL http://%goeIP%/api/set?frc=$val
attr Wally set70Name a_setAutoPvCharging
attr Wally set70NoArg 1
attr Wally set70URL http://%goeIP%/api/set?psm=0&amp=16&lmo=4&fup=true
attr Wally set71Name a_setManualMaxCharging
attr Wally set71NoArg 1
attr Wally set71URL http://%goeIP%/api/set?psm=2&amp=16&lmo=3&fup=false
attr Wally set72Name a_setManualMinCharging
attr Wally set72NoArg 1
attr Wally set72URL http://%goeIP%/api/set?psm=1&amp=6&lmo=3&fup=false
attr Wally set73Name a_setForceOffSetMin
attr Wally set73NoArg 1
attr Wally set73URL http://%goeIP%/api/set?psm=1&amp=6&lmo=3&fup=false&frc=1&alw=false
attr Wally setFollowGet settings
attr Wally showError 1
attr Wally sortby 3
attr Wally stateFormat { my $c=ReadingsVal("Wally","car_num",5);;\
  my $ca=ReadingsVal("Wally","charge_allowed","no");;\
  my $ch=ReadingsVal("Wally","charge_num",0);;\
  my $p=ReadingsVal("Wally","power",0);;\
  my $l=ReadingsVal("Wally","energy",0);;\
  my $e=(ReadingsVal("Wally","connection","") ne "ok");;\
  my $ret;;\
  if($ca eq "no"){\
     $ret="<p align=\"left\">\nnot_allowed\n<br/>not authenticated\n</p>";;\
  }elsif($c==1){\
    $ret=sprintf("<p align=\"left\">\nwaiting_car\n<br/>waiting for car (idle)\n<p/>");;\
  }elsif($c==2){\
    $ret=sprintf("<p align=\"left\">\ncharging_car\n<br/>charging %.1f kW\n<p/>",$p);;\
  }elsif($ch==12){\
      $ret=sprintf("<p align=\"left\">\ncharging paused\n<br/>charging PvSurplus %.1f kW\n</p>",$p);;\
  }elsif($ch==17){\
      $ret=sprintf("<p align=\"left\">\ncharging pausedrn<br/>charging PvSurplus paused\n</p>");;\
  }elsif($c==3){\
    $ret=sprintf("<p align=\"left\">\nwaiting_car\n<br/>waiting for car\n<p/>");;\
  }elsif($c==4){\
    $ret=sprintf("<p align=\"left\">\nfinished_car\n<br/>finished %.2f\n<p/>",$l);;\
  }else{\
    $ret="unknown";;\
 }\
 $ret}
attr Wally useSetExtensions 0
attr Wally userReadings nexttrip_distance:nexttrip_energy.* {sprintf("%.1f",ReadingsVal("$NAME","nexttrip_energy",0)/ReadingsVal("$NAME","nexttrip_energy_100km",1)*100)},\
  energy_today:energy_total.*  {sprintf("%.3f",ReadingsVal($NAME,"energy_total",0)-ReadingsVal("$NAME","energy_yesterday",0))},\
  energy_yesterday:none {}
attr Wally webCmd on:off
attr Wally widgetOverride led_brightness:slider,0,1,255 led_colorIdle:colorpicker,RGB led_colorWaitcar:colorpicker,RGB led_colorCharge:colorpicker,RGB led_colorFinished:colorpicker,RGB

Status als Nachricht

Für den Fall, dass man zwischendurch den Status der Wallbox abfragen möchte (z.B. via Modul Babble), empfiehlt es sich, ein ständig aktuelles Reading message bereitzuhalten.

Code: 
attr Wally babbleName wallbox
attr Wally userReadings <hier andere userReadings>,
  message:((car)|(charge)|(energy_total)).* {\
  my $ca=ReadingsVal("$NAME","car_num",0);;\
  my $ch=ReadingsVal("$NAME","charge_num",0);;\
  my $ret;;\
  if($ca==1){\
    $ret="An der Wallbox ist kein Fahrzeug angeschlossen";;\
  }elsif($ca=~/2|3/){\
    $ret="An der Wallbox ist der <Fahrzeugtyp> angeschlossen";;\
    if($ch=~/^([0-6]$)|(1[6,8])|(2[1-4])/){\
       my $nc=ReadingsVal("$NAME","charge",0);;\
       $ret.=", wird aber im Moment nicht geladen, der Grund dafür hat die Bezeichnung $nc";;\
    }elsif( $ch==12 ){\
       my $po=ReadingsVal("$NAME","power",0);;\
       my $en=ReadingsVal("$NAME","energy",0);;\
       $ret.=", wird mit solarem Überschuss von $po Kilowatt geladen und hat bereits $en Kilowattstunden erhalten.";;\
 }elsif( $ch==17 ){\
       my $en=ReadingsVal("$NAME","energy",0);;\
       $ret.=", die Ladung mit solarem Überschuss pausiert gerade. Der <Fahrzeugtyp> hat bereits $en Kilowattstunden erhalten.";;\
    }else{\
       my $po=ReadingsVal("$NAME","power",0);;\
       my $en=ReadingsVal("$NAME","energy",0);;\
       $ret.=", wird mit $po Kilowatt geladen und hat bereits $en Kilowattstunden erhalten.";;\
       my $du=ReadingsVal(<Device für das Fahrzeug>,"charge_timeremain",0);;\
       $ret.="Restladezeit etwa $du Minuten";;\
    }\
  }elsif($ca==4){\
    my $en=ReadingsVal("$NAME","energy",0);;\
    $ret="An der Wallbox ist der <Fahrzeugtyp> angeschlossen und wurde mit $en Kilowattstunden fertig geladen.";;\
  }else{\
    $ret="Die Wallbox befindet sich im Fehlerzustand, bitte überprüfen";;\
  }\
  return $ret},\
connection:LAST_ERROR.* {my $e=ReadingsVal("$NAME","LAST_ERROR","");;\
  if($e=~/timed out/){\
    return "timed_out"\
   }else{\
    return "ok"\
  }\
 }
Abgerufen von „http://wiki.fhem.de/w/index.php?title=GoE_Charger&oldid=39517“