Quelltext der Seite FHEM Tablet UI

{{Infobox Modul
|ModPurpose=Oberfläche für Fhem
|ModType=x
|ModFTopic=34233
|ModForumArea=Frontends
|ModTechName=n.a.
|ModOwner=setstate ({{Link2FU|7023|Forum}})
}}
[[Datei:tablet_ui.png|200px|thumb|right|Fhem Tablet UI]]
FHEM Tablet UI ist ein leichtgewichtiges aber funktionsreiches Framework zum Steuern und Überwachen von in Fhem integrierten Geräten. Zahlreiche Widgets können sehr flexibel und leicht per HTML Code konfiguriert werden.

In dieser Anleitung wird die Installation und Konfiguration des FHEM Tablet UI beschrieben.

{{Todo|alle Widgets hier übernehmen, Übersetzung, weitere Beispiele aus dem Forum einfügen (evtl. mit Link!?)}} 


== Voraussetzungen ==
Dieses User Interface für Tablets benötigt <u>keine</u> zusätzliche Frameworks, wie PHP, MySQL oder SmartVisu.

Voraussetzungen ist nur ein Standard-Fhem mit HTTPSRV Modul und ein beliebiger Standard-Browser  mit Javascript auf einem beliebigen Betriebssystem oder Webviewcontrol.

== Installation ==
* Im Befehls-Eingabefeld eingeben: <code><nowiki>update all https://raw.githubusercontent.com/knowthelist/fhem-tablet-ui/master/controls_fhemtabletui.txt</nowiki></code>
* Im Befehls-Eingabefeld eingeben: <code>define TABLETUI HTTPSRV ftui/ ./www/tablet Tablet-UI</code>
* Im Verzeichnis ./fhem/www/tablet die Datei index-example.html in index.html umbenennen oder eine neue index.html erzeugen und diese index.html wie nachfolgend beschrieben editieren.

Das UI ist über den Link "Tablet-UI" auf der Fhem-Hauptseite oder durch Direktaufruf der URL "<nowiki>http://<Fhem-url>:8083/fhem/tablet/index.html</nowiki>" zu erreichen.

Hinweise zu einer manuellen Installation und weitere Infos sind auf der Projektseite https://github.com/knowthelist/fhem-tablet-ui zu finden.

== Update ==
* Prüfen der Änderungen seit dem letzten Download/Update durch Eingabe von: <code><nowiki>update check https://raw.githubusercontent.com/knowthelist/fhem-tablet-ui/master/controls_fhemtabletui.txt</nowiki></code>
* Update des UI durch Eingabe von: <code><nowiki>update all https://raw.githubusercontent.com/knowthelist/fhem-tablet-ui/master/controls_fhemtabletui.txt</nowiki></code>

Über 
<code><nowiki>update add https://raw.githubusercontent.com/knowthelist/fhem-tablet-ui/master/controls_fhemtabletui.txt</nowiki></code>
kann seit dem 24.12.2015 die URL zum normalen Updatebefehl von FHEM hinzugefügt werden. Mit einen "update check" sieht man dann  gleich alle Updates aus beiden "Welten".

== Weitere Widgets ==

=== Widgets for Fhem-tablet-ui ===
Zusätzlich zu den bei der Installation des Tablet UI direkt zur Verfügung stehenden Widgets, gibt es eine weitere Widget-Quelle von nesges unter https://github.com/nesges/Widgets-for-fhem-tablet-ui. Die Widgets aus dieser Quelle müssen für eine Nutzung separat installiert werden.

Dazu folgenden Befehl in die Fhem-Befehlszeile eingeben: <code><nowiki>update all https://raw.githubusercontent.com/nesges/Widgets-for-fhem-tablet-ui/master/controls_widgets-for-fhem-tablet-ui.txt</nowiki></code>. 

Näheres zur Installation unter [https://github.com/nesges/Widgets-for-fhem-tablet-ui/wiki/Installation Wiki: Installation]. 

Die Dokumentation der einzelnen Widgets befindet sich ebenfalls [https://github.com/nesges/Widgets-for-fhem-tablet-ui/wiki im Github-Wiki].

== Konfiguration ==
Die Konfiguration der angezeigten Widgets erfolgt in der Datei '''index.html''' im Hauptordner 'tablet'.

'''Metadaten-Konfiguration'''

Refresh sofort, alle 15 Minuten ein voller Refresh (shortpoll) statt alle 30 Sekunden ein voller Refresh
:<code><meta name="longpoll" content="1"></code>

Drag&Drop deaktivieren
:<code><meta name='gridster_disable' content='1'></code>

Toast messages deaktivieren
:<code><meta name='toast' content='1'></code>

Größe des Basis-Rasters (data-sizey=1/data-sizex=1)
:<code><meta name="widget_base_width" content="116"></code>
:<code><meta name="widget_base_height" content="131"></code>

Abstände der Gridsterelemente verkleinern:
:<code><meta name="widget_margin" content="3"></code>

Folgender Link sollte auskommentiert werden, solange es diese Datei noch nicht gibt, da diese immer wieder zu Problemen beim Laden der Seite führen kann:
:<code><link rel="stylesheet" href="/fhem/tablet/css/fhem-tablet-ui-user.css" /></code>

Das Layout und das Aussehen des UI kann durch die Klassen-Attribute beeinflusst werden. Verfügbare Klassen sind:

container, left, right, cell, narrow, darker, big, bigger, small

== Farbe ==
Es besteht die Möglichkeit, die Farbwerte in hexadezimaler Form oder als RGB-Wert anzugeben. Zum Beispiel: Hex: #A3CFA3 RBG: rgb(163, 207, 163).

Knallige Farben wie #ff0000 für Rot oder #00ff00 für Grün sollten vermieden werden. Es ist besser unterhalb von #D0 (208) für die Grundfarben zu bleiben.

Hilfreich bei der Suche nach den Farbwerten ist der color picker: http://www.w3schools.com/tags/ref_colorpicker.asp


== CSS Class description ==

Not all widgets support all classes

* readonly : changing of state is not allowed
* wider : 25px extra space for the widget to the top
* narrow : shorter distant to the widget above
* w1x, w2x, w3x : set the widget to a fix width: 1x, 2x, 3x width
* mini : lowest diameter for volume widget
* small : font 80% size (label), small diameter for volume widget
* medium : font 120% size
* large : font 150% size
* big : font 200% size
* bigplus : font 270% size
* bigger : font 320% size
* bigger.thin : font 450% size
* grande : font 600% size
* gigantic: font 144px size + 120px line-height
* thin : font thin
* darker : forecolor in gray
* hue-tick : draw ticks in color range
* hue-front : draw handle in color range
* hue-back : draw background in color range
* dim-tick : draw ticks in brightness range
* dim-front : draw handle in brightness range
* dim-back : draw background in brightness range
* red : foreground color red
* green : foreground color green
* blue : foreground color blue
* doublebox-v : container to place 2 small widgets (e.g. switch) one above the other
* doublebox-h : container to place 2 small widgets (e.g. switch) side by side
* timestamp : deliver the date time for the reading instead the value
* inline : positioning elements in a row, no line break
* top-space : 15px extra on top (top-space-2x -> 30px; top-space-3x -> 45px)
* left-space : 15px extra on left (left-space-2x -> 30px; left-space-3x -> 45px)
* right-space : 15px extra on right (right-space-2x -> 30px; right-space-3x -> 45px)
* blink : blink animatation for label or symbol widget
* verticalLine : Vertikale Line am rechten Rand

== Positioning ==

*container : new box or new row
*col-x-y : new column with x/y of width (col-1-3,col-2-3,col-1-2,col-1-4,col-1-8,col-1-5,col-2-5,col-3-5,col-4-5)
*inline : positioning elements in a row, no line break
*top-space : 15px extra on top (top-space-2x -> 30px; top-space-3x -> 45px)
*left-space : 15px extra on left (left-space-2x -> 30px; left-space-3x -> 45px)
*right-space : 15px extra on right (right-space-2x -> 30px; right-space-3x -> 45px)
*top-narrow : -15px closer on top (top-narrow-2x -> -30px; top-narrow-10 -> -10px)
*centered : horizontal centered
*left-align : align text left
*right-align : align text right
*wider : 15px extra space for the widget all around
*narrow : shorter distant to the widget above
*fullsize : 100% in width and height

== Widgets -- Konfiguration ==

Teilweise dokumentierte Widgets:
* [https://github.com/nesges/Widgets-for-fhem-tablet-ui/wiki/button button]: Variante der push und switch Widgets, die entweder einen URL ansteuern oder einen Fhem-Befehl absetzen kann.
* [[#chart|chart]]: chart with similar capabilities as the FHEM plots 
* checkbox:
* [[#circlemenu|circlemenu]]: Mehrere Widgets hinter einem Widget verborgen, trotz des 'circle' im Namen kann das Menue jetzt auch horizontal oder vertikal ausgeklappt werden 
* [https://github.com/nesges/Widgets-for-fhem-tablet-ui/wiki/clicksound clicksound]: Mit dem Widget "clicksound" können Sounds an Click-Events von Elementen gebunden werden. 
* [https://github.com/nesges/Widgets-for-fhem-tablet-ui/wiki/clock clock]: Das Widget "clock" stellt eine einfach Uhr zur verfügung.
* colorwheel:
* daytimepicker:
* departure:
* [[#dimmer|dimmer]]: toogle button with a setter for on value
* eventmonitor:
* highchart:
* [[#homestatus|homestatus]]: selector for 4 states (1=home, 2=night, 3=away, 4=holiday)
* [https://github.com/nesges/Widgets-for-fhem-tablet-ui/wiki/iframe iframe]]: Widget zum Einbinden externer Inhalte in einem Iframe. 
* [[#image|image]]: insert an image, the URL is given by a reading
* [https://github.com/nesges/Widgets-for-fhem-tablet-ui/wiki/itunes_artwork itunes_artwork]: itunes_artwork durchsucht die iTunes-Datenbank anhand eines Arrays von beliebigen Suchworten nach einem Cover-Artwork und zeigt dieses an. 
* [https://github.com/nesges/Widgets-for-fhem-tablet-ui/wiki/javascript javascript]: Ermöglicht die Ausführung beliebigen Javascript-Codes aus einem Reading.
* [https://github.com/nesges/Widgets-for-fhem-tablet-ui/wiki/joinedlabel joinedlabel]: verbindet mehrere Readings zu einem Feld
* [https://github.com/nesges/Widgets-for-fhem-tablet-ui/wiki/klimatrend klimatrend]: wandelt Daten aus dem statistics-Modul in einen Pfeil um, der den aktuellen Trend anzeigt. 
* [https://github.com/nesges/Widgets-for-fhem-tablet-ui/wiki/kodinowplaying kodinowplaying]: zeigt Informationen zu grade in KODI gespielten Medien in Form eines Labels an.
* [[#label|label]]: ein state als Text anzeigen (Farbe einstellbar)
* [[#level|level]]: vertical/horizontal bar to show values between min/max value
* link:
* [https://github.com/nesges/Widgets-for-fhem-tablet-ui/wiki/mpdnowplaying mpdnowplaying]: zeigt Titelinformationen eines per MPD-Modul angebundenen Music Player Daemon an. 
* [https://github.com/nesges/Widgets-for-fhem-tablet-ui/wiki/multistatebutton multistatebutton]: Variante des push-Widgets das den set-Befehl abhängig vom gelesenen Status ändert.
* [[#pagetab|pagetab]]: Element to smoothly exchange the whole page with another page
* pagebutton:
* [[#playstream|playstream]]: Abspielen eines Webradio-Streams per Button
* [[#popup|popup]]: a popup dialog which open on click on another widget 
* [[#progress|progress]]: round symbolic display for percent values
* [[#push|push]]: send any command to Fhem e.g. up / down
* range:
* readingsgroup:
* [https://github.com/nesges/Widgets-for-fhem-tablet-ui/wiki/reload reload]: auslösen eine Pagereloads
* [[#rotor|rotor]]: Umschalten von zwei oder mehr Widgets an einer Position
* [[#select|select]]: Combobox to provide a list for selection
* [https://github.com/nesges/Widgets-for-fhem-tablet-ui/wiki/settimer settimer]: zum anzeigen und einstellen einer Uhrzeit.
* [[#simplechart|simplechart]]: simple XY line chart for one value (reads directly from Fhem log file) 
* [[#slider|slider]]: vertical slider to select between min/max value
* spinner:
* swiper:
* [[#switch|switch]]: Toggle any command to Fhem (e.g. on / off)
* [[#symbol|symbol]]: State als Symbol darstellen (z.B. Fenster offen)
* [[#thermostat|thermostat]]: dial for heater thermostates to set desired value and show current value
* [[#volume|volume]]: dial to set a single value (e.g. 0-60)
* [[#weather|weather]]: insert an icon or image, represending a weather literal
* [https://github.com/nesges/Widgets-for-fhem-tablet-ui/wiki/wind_direction wind_direction]: Zeigt die Windrichtung auf einer Windrose an. 


Ein Demo der Widgets findet ihr [http://knowthelist.github.io/fhem/tablet/demo_widgets.html Hier].
----------------------------------

Für alle Widgets gilt:
{| class="wikitable"
|+allgemeine Attribute
|-
!align="right" |data-type
|Widget-Typ
|-
!align="right" |data-device
|Fhem-Name des Gerätes (mit dem Befehl 'list' bekommt man im Fhem die kpl. Liste)
|-
!align="right" |class
|CSS-Klassen für Aussehen und Formatierung des Widgets
|-
|}


<div id="chart">'''CHART'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-logdevice
|name of the logdevice (e.g. FileLog_WohnzimmerHeizung) or array of names if more than one graph shall be displayed
|-
|-
!align="right" |data-logfile
|name of the logfile (e.g. WohnzimmerHeizung-2015.log) or or array of names if more than one graph shall be displayed
|'-' or omitting this data means current logfile
|-
!align="right" |data-columnspec
|definition for how to find the values (e.g. "4:meas.*:1:int") or or array of columnspecs if more than one graph shall be displayed
|-
|-
!align="right" |data-style
|name of the graph style to be used (e.g. 'SVGplot l0' or 'ftui l0dash') or or array of styles if more than one graph shall be displayed using different stlyes. The standard fhem plot styles can be used furthermore there are some more predefined styles existing (details see css file). Own styles can be specified e.g. in the fhem-table-ui-user.css file.
|-
|-
!align="right" |data-ptype
|name of the plot type (e.g. 'lines' or 'fa-cog') or or array of plottypes if more than one graph shall be displayed. All fhem plot styles are supported. Additionally it is possible to specify symbols (currently supported are font awesome ('fa-...'), open automation ('oa-...') and fhem symbols ('fs-...'))
|'lines'
|-
!align="right" |data-uaxis
|name of the axis to be used ('primary' or 'secondary') or or array of axis' to be used if more than one graph shall be displayed. The 'primary' axis is labelled on the left side, the 'secondary' axis is labelled on the right side
|'primary'
|-
!align="right" |data-legend
|caption of the graph (used in the legend and at the cursor) or an array of legend texts if more than one graph shall be displayed.
|-
|-
!align="right" |data-minvalue
|min Y value to Show or an array of values for dynamic minY for primary axis. A value of 'auto' means that the value is calculated from the data displayed dynamically
|10
|-
!align="right" |data-minvalue_sec
|min Y value to Show or an array of values for dynamic minY for secondary axis. A value of 'auto' means that the value is calculated from the data displayed dynamically
|'auto'
|-
!align="right" |data-maxvalue
|max Y value to Show or an array of values for dynamic maxY for primary axis. A value of 'auto' means that the value is calculated from the data displayed dynamically
|30
|-
!align="right" |data-maxvalue_sec
|max Y value to Show or an array of values for dynamic maxY for secondary axis. A value of 'auto' means that the value is calculated from the data displayed dynamically
|'auto'
|-
!align="right" |data-yticks
|value distance between Y tick lines (related to primary axis). A value of 'auto' means that the value is calculated from the data displayed dynamically.
|'auto'
|-
!align="right" |data-xticks
|time range between each X tick lines (in minutes). A value of 'auto' means that the value is calculated from the data displayed dynamically
|'auto'
|-
!align="right" |data-daysago_start
|number of days back from now for the start of the plot (0 means the plot starts from today 0:00). Additionally the x-axis start value can be set here unsing standard data formats like ('2013-10-23'), the time portion of the string is only used when <code>data-nofulldays</code> is 'true'.
|0
|-
!align="right" |data-daysago_end
|number of days back from now for the end of the plot (-1 means the plot ends today 24:00). Additionally the x-axis end value can be set here unsing standard data formats like ('2013-10-23'), the time portion of the string is only used when <code>data-nofulldays</code> is 'true'.
|-1
|-
!align="right" |data-nofulldays
|switch to activate/deactivate rounding of the xaxis start and end values to full days ('true' or 'false')
|'false'
|-
!align="right" |data-ytext
|text to be shown besides the primary y axis.
|-
|-
!align="right" |data-ytext_sec
|text to be shown besides the secondary y axis.
|-
|-
!align="right" |data-yunit
|unit of the value to show beside of each Y ticks for primary y axis.
|-
|-
!align="right" |data-crosshair
|switch to activate/deactivate the crosshair cursor ('true' or 'false')
|'false'
|-
!align="right" |data-cursorgroup
|number to define coupling of the crosshair cursor. The cursors of all charts having the same number are coupled and move together.
|-
|-
!align="right" |data-scrollgroup
|number to define coupling of the scrolling (shift and zoom). All charts having the same number are scrolled (shifted and zoomed) together.
|-
|-
!align="right" |data-showlegend
|switch to activate/deactivate the initial display of the legend window ('true' or 'false')
|'false'
|-
!align="right" |data-yunit_sec
|unit of the value to show beside of each Y ticks for secondary y axis.
|-
|-
!align="right" |data-width
|fixed size for width (in&nbsp;% or px)
|-
|-
!align="right" |data-height
|fixed size for height (in&nbsp;% or px)
|-
|-
!align="right" |class
|fullsize, noticks, nobuttons
|
|-
|}

<code>data-logfile</code> can be omitted in this case the default value "-" will be used. This means that the current logfile is going to be used.

There are several buttons that control the dynamic behaviour of the chart. The <-, ->, + and - buttons shift and zoom the displayed data. The "legend" and "cursor" buttons are switching on and off the display of the legend window and the crosshair cursor respectively.

When the legend window is displayed, a click on the legend text shows/hides the respective graph. The legend window can be dragged to other positions on desktop browsers (currently not yet working for iOS and Android).

The crosshair cursor currently only works dynamically on desktop browsers. On iOS and Android you have to tap on the screen to set the cursor to a new position.

There is a number of css styles that control the visible appearance of the chart. The following classes are supported:

{| class="wikitable"
!CSS class name
!Description
|-
!.chart-background
|Color etc. for the chart background
|-
!.text.axes
|Font and color for the chart axes
|-
!.buttons
|Size and color for the buttons (shift etc.)
|-
!.gridlines
|Size and color for gridlines generally
|-
!.xaxis
|Font, size and color for xaxis
|-
!.yaxis
|Font, size and color for yaxis
|-
!.xticks
|Font, size and color for xticks
|-
!.yticks
|Font, size and color for yticks
|-
!.crosshair
|Font, size and color (foreground/background) for the crosshair cursor
|-
!.caption
|Font, size and color for text buttons for legend and cursor switching
|-
!.legend
|Font, size and background color for legend window
|-
|-
|}

[[#Beispiel_chart|Link zu einem Beispiel]]


<div id="circlemenu">'''CIRCLEMENU'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-item-diameter
|diameter of the circle
|52
|-
!align="right" |data-circle-radius
|radius of each item, in pixel
|70
|-
!align="right" |data-direction
|position of the items in relation to the center
|'full'
|-
!align="right" |data-close-after
|closing time of the circle-menu
|(item-count + 1s) or a minimum of 4s
|-
!align="right" |class
|keepopen
|
|-
|}

Optionen für data-direction: top | right | bottom | left | top-right | top-left | bottom-right | bottom-left | top-half | right-half | bottom-half | left-half | full | vertical | horizontal

[[#Beispiel_circlemenu|Link zu einem Beispiel]]


<div id="dimmer">'''DIMMER'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-get
|name of the reading to get from Fhem
|'STATE'
|-
!align="right" |data-get-on
|value for ON status to get
|'on'
|-
!align="right" |data-get-off
|value for OFF status to get
|'off'
|-
!align="right" |data-set
|(<command> <device> <reading> <value>) 
|
|-
!align="right" |data-set-on
|value for ON status to set
|value of data-get-on
|-
!align="right" |data-set-off
|value for OFF status to set
|value of data-get-off
|-
!align="right" |data-cmd
|name of the command (<command> <device> <value>) (e.g. setstate, set, setreading, trigger)
|'set'
|-
!align="right" |data-dim
|name of the reading responsible for dim (<command> <device> <reading> <value>) 
|value of data-get-on
|-
!align="right" |data-icon
|name of the font-awesome icon
|fa-lightbulb-o
|-
|}

[[#Beispiel_dimmer|Link zu einem Beispiel]]

<div id="homestatus">'''HOMESTATUS'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-get
|name of the reading to get from Fhem
|'STATE'
|-
!align="right" |data-set
|command to send to Fhem (<code>set <device> <command> <value></code>)
|''
|-
!align="right" |data-alias
|array of fix names to show only in the UI as an alias to the real states
|''
|-
!align="right" |data-icons
|array of icons related to the data-get-on array
|''
|-
!align="right" |data-version
|name of the status model e.g. 'residents','roommate','guest' 
|(default NULL)
|-
|}

The default version has 4 states: '1','2','3','4' The default aliases are 'Home','Night','Away','Holiday'; data-version='residents' or 'roommate' or 'guest' has 5 states ('home','asleep','absent','gone','gotosleep') They have these aliases 'Home','Night','Away','Holiday','Retire'

[[#Beispiel_homestatus|Link zu einem Beispiel]]


<div id="image">'''IMAGE'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-get
|name of the reading to get an URL from Fhem
|'STATE'
|-
!align="right" |data-size
|width of the image in px or %, the height scales proportionally
|50%
|-
!align="right" |data-url
|URL of the image to show (use data-url or data-device + data-get, not both)
|
|-
!align="right" |data-refresh
|Interval in seconds for image refresh for usage together with data-url
|900
|-
|}

[[#Beispiel_image|Link zu einem Beispiel]]

<div id="label">'''LABEL'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-get
|name of the reading to get from Fhem
|
|-
!align="right" |data-fix
|keeping a specified number of decimals. 
|'-1' -> non-numeric
|-
!align="right" |data-part
|split position of the space separated value to show or an RegEx
|
|-
!align="right" |data-colors
|a array of color values to affect the colour of the label according to the limit value
|
|-
!align="right" |data-limits-get
|name of the DEVICE:Reading to colorize the label 
|data-device:data-get
|-
!align="right" |data-limits
|an array of numeric values to affect the colour of the Label
|
|-
!align="right" |data-limits-part
|part number of the space separated value to show or a RegEx 
|'-1' -> all
|-
!align="right" |data-unit
|add a unit after a numeric value. use encoded strings e.g. "%B0C%0A"
|
|-
!align="right" |data-substitution
|regex-substitution to apply on the value. Standard regex notation (s/regex/subst/modifier) is expected
|
|-
!align="right" |class
|small, large, big, bigger, thin, red, green, blue, darker, timestamp, w1x, w2x, w3x, fixedlabel, icon, bg-limit
|
|}

Mit der Class 'fixedlabel' kann man Label einbauen, die einen festen Text (direkt im HTML) haben, aber trotzdem die Farbe per Reading Value beeinflusst werden könnte.<br>
Mit der Class 'icon' kann man Label einbauen, die wie Icons aussehen. Als Hintergrund gibt es 'icon round' (rund), 'icon square' (Rechteck mit abgerundeten Ecken) und 'icon squareborder' (Rechteck mit abgerundeten Ecken und einem zusätzlichen Rand).<br>
Mit der Class 'bg-limit' wird der Hintergrund des Icon auf grün oder rot gesetzt, passend zum on/off Status des data-limits.

[[#Beispiel_label|Link zu einem Beispiel]]

<div id="level">'''LEVEL'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-get
|name of the reading to get from Fhem
|'STATE'
|-
!align="right" |data-min
|minimal value to set
|'0'
|-
!align="right" |data-max
|maximal value to set
|'100'
|-
!align="right" |data-on
|value where the slider moves to max
|'on'
|-
!align="right" |data-off
|value where the slider moves to min
|'off'
|-
!align="right" |data-colors
|a array of color values to affect the colour of the label according to the limit value
|
|-
!align="right" |data-limits
|a array of numeric or RegEx values to affect the colour of the label
|
|-
!align="right" |class
|mini, horizontal
|
|-
|}

[[#Beispiel_level|Link zu einem Beispiel]] (fehlt noch)

<div id="pagetab">'''PAGETAB'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-url
|URL of the new page to show
|
|-
!align="right" |data-icon
|name of the font-awesome icon
|'fa-power-off'
|-
!align="right" |data-background-icon
|name of the font-awesome icon for background 
|''
|-
!align="right" |data-on-background-color
|color of ON state
|'#aa6900'
|-
!align="right" |data-off-background-color
|color of OFF state
|'#505050'
|-
!align="right" |data-on-color
|color of ON state
|'#aa6900'
|-
!align="right" |data-off-color
|color of Off state
|'#505050'
|-
!align="right" |data-get-on
|array of status to assign a special icon-list from data-icons
|
|-
!align="right" |data-icons
|array of icons related to the a data-get-on array
|
|-
!align="right" |class
|warn, activate (as additionals for data-icons)
|
|-
|}

[[#Beispiel_pagetab|Link zu einem Beispiel]]

<div id="playstream">'''PLAYSTREAM'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-url
|URL des Radio-Streams
|-
!align="right" |data-get
|name of the reading to get the control state from FHEM
|'STATE'
|-
!align="right" |data-get-on
|value for PLAY status to get. 
|'on'
|-
!align="right" |data-get-off
|value for STOP status to get. 
|'off'
|-
!align="right" |data-volume
|name of the reading to get the volume value (0-100) 
|volume
|-
|}

[[#Beispiel_playstream|Link zu einem Beispiel]]

<div id="popup">'''POPUP'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-get
|name of the reading where to get the alert value from
|'STATE'
|-
!align="right" |data-get-on
|value which trigger to open the dialog
|'on'
|-
!align="right" |data-off
|value which trigger to close the dialog 
|'off'
|-
!align="right" |data-width
|fixe size for width (in % or px)
|
|-
!align="right" |data-height
|fixe size for height (in % or px)
|
|-
|}

[[#Beispiel_popup|Link zu einem Beispiel]]

<div id="progress">'''PROGRESS'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-get
|name of the reading to get from Fhem
|'STATE'
|-
!align="right" |data-max
|maximal value to set or name of the reading which helds the max value
|100
|-
!align="right" |class
|novalue, percent
|
|-
|}

[[#Beispiel_progress|Link zu einem Beispiel]] (fehlt noch)

<div id="push">'''PUSH'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default-Wert
|-
!align="right" |data-set
| name of the reading to set on FHEM (<command> <device> <reading> <value>) 
|
|-
!align="right" |data-set-on
|value to send when the the button get pressed oder ein Array zwischen dessen Werten umgeschaltet werden kann
|
|-

!align="right" |data-icon
|name of the font-awesome icon
|
|-
!align="right" |data-background-icon
|name of the font-awesome icon for background 
|'fa-circle'
|-
!align="right" |data-cmd
|name of the command (<command> <device> <value>) (e.g. setstate, set, setreading, trigger)
|'set'
|-
!align="right" |data-doubleclick
|timeout to wait for a second click or touch. '0' disables the doubleclick feature. 
|0
|-
!align="right" |data-countdown
|secondes for the countdown progress control 
|autodetect from 'on-for-timer' command
|-
!align="right" |data-background-icon
|name of the font-awesome icon for background 
|
|-
!align="right" |data-off-background-color
|fix color attribute for OFF state or DEVICE:READING for dynamic setting 
|#505050
|-
!align="right" |data-off-color
|fix color attribute for Off state or DEVICE:READING for dynamic setting
|#505050
|-
|}

[[#Beispiel_push|Link zu einem Beispiel]]


<div id="rotor">'''ROTOR'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" | data-delay
|time in millisecondes to wait until next list item get shown
|3500
|-
!align="right" |class
|fade, rotate
|'' 
|-
|}
Ohne Angabe von class erfolgt keine Animation.

[[#Beispiel_rotor|Link zu einem Beispiel]]


<div id="select">'''SELECT'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-get
|name of the reading that get the selected item of the list
|
|-
!align="right" |data-set
|name of the reading to set on Fhem (<command> <device> <reading> <value>)
|''
|-
!align="right" |data-list
|name of the reading to get a :-separated list from Fhem
|''
|-
!align="right" |data-items
|an array of fix items to show in the selection box (alternative if data-list is empty)
|
|-
!align="right" |data-alias
|an array of fix names to show only in the selection box as an alias to the real items
|
|-
!align="right" |data-cmd
|name of the command to send to Fhem (<command> <device> <reading> <value>) (e.g. setstate, set, setreading, trigger)
|'set'
|-
!align="right" |data-quote
|characters to enclose the send value
|
|-
!align="right" |class
|wider, w1x, w2x, w3x, large, big
|
|-
|} 

[[#Beispiel_select|Link zu einem Beispiel]]
   
<div id="simplechart">'''SIMPLECHART'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-logdevice
|name of the logdevice (e.g. FileLog_WohnzimmerHeizung)
|
|-
!align="right" |data-logfile
|name of the logfile (e.g. WohnzimmerHeizung-2015.log)
|'-' means current logfile
|-
!align="right" |data-columnspec
|definition for how to find the values (e.g. "4:meas.*:1:int")
|''
|-
!align="right" |data-minvalue
|min Y value to Show or an array of values for dynamic minY 
|10
|-
!align="right" |data-maxvalue
|max Y value to Show or an array of values for dynamic maxY 
|30
|-
!align="right" |data-yticks
|value distance between Y tick lines
|5
|-
!align="right" |data-xticks
|time range between each X tick line (in Minuten)
|360 minutes
|-
!align="right" |data-daysago
|number of days back from now 
|0
|-
!align="right" |data-caption
|name of the chart to show as text 
|
|-
!align="right" |data-yunit
|unit of the value to show beside of each Y ticks
|
|-
!align="right" |data-width
|fixe size for width (in % or px)
|
|-
!align="right" |data-height
|fixe size for height (in % or px)
|
|-
!align="right" |class
|fullsize, noticks
|
|-
|} 

[[#Beispiel_simplechart|Link zu einem Beispiel]] (fehlt noch)

<code>data-logfile</code> kann man auch weglassen, dann greift der Defaultwert "-". Damit wird das neuste Logfile gelesen.

   
<div id="slider">'''SLIDER'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-get
|name of the reading to get from Fhem
|'STATE'
|-
!align="right" |data-set
|command to send to Fhem (<code>set <device> <command> <value></code>)
|''
|-
!align="right" |data-cmd
|name of the command (<command> <device> <value>) (e.g. setstate, set, setreading, trigger)
|'set'
|-
!align="right" |data-min
|minimal value to set
|0
|-
!align="right" |data-max
|maximal value to set
|100
|-
!align="right" |data-on
|value where the slider moves to max
|'on'
|-
!align="right" |data-off
|value where the slider moves to min
|'off'
|-
!align="right" |data-value
|wenn true wird beim sliden der Wert angezeigt
|
|-
!align="right" |data-width
|width for horizontal sliders
|'120px', for mini '60px'
|-
!align="right" |data-height
|height for vertical sliders 
|'120px', for mini '60px'
|-
!align="right" |class
|Aussehen/Ausrichtung
|
|-
|}

Für class steht mini, horizontal und negated (0 liegt oben) zur Verfügung.

[[#Beispiel_slider|Link zu einem Beispiel]]

<div id="switch">'''SWITCH'''</div>

{| class="wikitable"
!HTML-Attribut
!Beschreibung
!Default-Wert
|-
!align="right" |data-get
|Name des Reading, was gelesen werden soll
|'STATE'
|-
!align="right" |data-get-on
|Wert, bei dem zum Status ON geschaltet werden soll. 
|'on'
|-
!align="right" |data-get-off
|Wert, bei dem zum Status OFF geschaltet werden soll. 
|'off'
|-
!align="right" |data-set-on
|Wert, der zu Fhem gesendet werden soll, wenn das Widget auf ON geschaltet wurde  
|Wert von data-get-on
|-
!align="right" |data-set-off
|Wert, der zu Fhem gesendet werden soll, wenn das Widget auf OFF geschaltet wurde 
|Wert von data-get-off
|-
!align="right" |data-cmd
|Kommando Name (<command> <device> <value>) <br />(z.B setstate, set, setreading, trigger) 
|'set'
|-
!align="right" |data-icon
|Name des Font-Awesome Icon. 
|'fa-lightbulb-o'
|-
!align="right" |data-background-icon
|Name des Font-Awesome Hintergrund Icon. 
|'fa-circle'
|-
!align="right" |data-on-color
|Widget Farbe beim Status ON 
|'#aa6900'
|-
!align="right" |data-off-color
|Widget Farbe beim Status OFF 
|'#505050'
|}

<code>data-get-on</code> and <code>data-get-off</code> accept also RegEx values. e.g. data-get-on="[0-9]{1,3}|on" means set switch on if STATE is a numeric value or 'on'. data-get-off="!on" means accept all but the data-get-on value (negation)

[[#Beispiel_switch|Link zu einem Beispiel]]


<div id="symbol">'''SYMBOL'''</div>

dual state notation

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-get
|Name des Reading, was gelesen werden soll
|'STATE'
|-
!align="right" |data-get-on
|value for ON status to get. 
|'open'
|-
!align="right" |data-get-off
|value for OFF status to get. 
|'closed'
|-
!align="right" |data-icon
|Name des font-awesome-Symbols  
|'ftui-window'
|-
!align="right" |data-background-icon
|Hintergrundsymbol
|''
|-
!align="right" |data-on-background-color
|Farbe für ON-Zustand.
|'#aa6900'
|-
!align="right" |data-off-background-color
|Farbe für OFF-Zustand.
|'#505050'
|-
!align="right" |data-on-color
|Farbe für ON-Zustand.
|'#aa6900'
|-
!align="right" |data-off-color
|Farbe für OFF-Zustand.
|'#505050'
|-
|}

multi state notation

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-get
|Name des Reading, was gelesen werden soll
|'STATE'
|-
!align="right" |data-states
|array of states. 
|
|-
!align="right" |data-icons
|Array mit Icons zu data-states Array
|
|-
!align="right" |data-background-icons
|Array mit Icons zu data-states Array
|
|-
!align="right" |data-colors
|array of colors related to the data-states array
|''
|-
!align="right" |data-background-colors
|array of background-colors related to the data-states array
|''
|-
|}

data-get-on,data-get-off and data-states accept also RegEx values. The value for one icon can also contain an additional animatation CSS name, e.g. "fa-exclamation-triangle fa-blink" for a blinking Symbol

[[#Beispiel_symbol|Link zu einem Beispiel]]


<div id="thermostat">'''THERMOSTAT'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-get
|name of the reading to get from Fhem
|'desired-temp'
|-
!align="right" |data-temp
|reading for measured temperature of thermostates
|'measured-temp'
|-
!align="right" |data-set
|command to send to Fhem (set <device> <command> <value>)
|'desired-temp'
|-
!align="right" |data-valve
|reading for valve position of thermostates
|
|-
!align="right" |data-min
|minimal value to set
| 10
|-
!align="right" |data-max
|maximal value to set
| 30
|-
!align="right" |data-minColor
|Farbe des Keises für Min
| #4477FF
|-
!align="right" |data-maxColor
|Farbe des Kreises für Max, zwischen Min und Max wird linear interpoliert 
| #FF0000
|-
!align="right" |data-step
|step size for value adjustment e.g. 0.5 
|1
|-
!align="right" |data-bgColor
|Die Farbe der Kreises zwischen den ticks
|'transparent'
|-
!align="right" |data-fgColor
|Die Farbe der zahl im Kreismittelpunkt
|#bbbbbb
|-
!align="right" |data-tkColor
|Die Farbe der ticks
|#696969
|-
|-
!align="right" |data-angleOffset
|Start der ticks im Kreis (in Winkelgraden, 0 = oben)
| -120
|-
!align="right" |data-angleArc
|Bereich der ticks im Kreis (in Winkelgraden)
|240
|-
!align="right" |class
|big, readonly
|
|-
|}

[[#Beispiel_thermostat|Link zu einem Beispiel]]


<div id="volume">'''VOLUME'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-get
|name of the reading to get from Fhem 
|'STATE'
|-
!align="right" |data-set
|command to send to Fhem (set <device> <command> <value>)
|''
|-
!align="rigth" |data-cmd
|name of the command (<command> <device> <value>) (e.g. setstate, set, setreading, trigger) 
|'set'
|-
!align="right" |data-min
|minimal value to set
|0
|-
!align="right" |data-max
|maximal value to set
|70
|-
!align="right" |class
|small, hue-tick, hue-front, hue-back, dim-tick ,dim-front, dim-back
|
|-
|}

[[#Beispiel_volume|Link zu einem Beispiel]] (fehlt noch)


<div id="weather">'''WEATHER'''</div>

{| class="wikitable"
!HTML Attribut
!Beschreibung
!Default Wert
|-
!align="right" |data-get
|name of the reading to get the weather literal from Fhem
|'STATE'
|-
!align="right" |data-imageset
|collection of images to display current weather situation. Possible values: 'meteocons', 'kleinklima'
|'meteocons'
|-
!align="right" |data-image-path
|path to the images of the selected imageset
|/images/weather/
|-
|}

[[#Beispiel_weather|Link zu einem Beispiel]]

== Widgets -- Beispiele ==

<div id="Beispiel_chart">'''Chart'''</div>

Display a chart with similar capabilities as the FHEM plots

<pre>
<div    data-type="chart"
	data-logdevice='["Log.Garden","Log.Garden","Log.Garden","Log.Predicted"]'
	data-columnspec='["4:Garden.T:15:","10:Garden.T:0:delta-h","10:Garden.T:0:delta-d","4:predicted.*:15:"]'
	data-style='["ftui l0fill","ftui l1fill","ftui l2","ftui l3dot"]'
	data-ptype='["lines","histeps","histeps","cubic"]'
	data-uaxis='["primary","secondary","secondary","primary"]'
	data-legend='["Temperature","Rain/hour","Rain/day","Predicted Temp."]'
	data-yunit="°C"
	data-ytext="Temperature"
	data-minvalue="auto"
	data-maxvalue="auto"
	data-yunit_sec="mm"
	data-ytext_sec="Rain (mm)"
	data-height="250"
	data-yticks="auto"
	data-minvalue_sec="auto"
	data-maxvalue_sec="auto"
	data-nofulldays="true"
	data-daysago_start="2013-08-13T00:00:00"
	data-daysago_end="2013-08-14T00:00:00"
	data-cursorgroup="1"
	data-scrollgroup="1"
	data-xticks="auto">
</div>
</pre>

[[Datei:chart_tabletUI.png]]


<div id="Beispiel_circlemenu">'''Circlemenu'''</div>

Cover a lot of other button behind one single button

<pre>
<div class="left">
<div data-type="circlemenu" class="cell circlemenu">
    <ul class="menu">
      <li><div data-type="push" data-icon="fa-wrench"></div></li>
      <li><div data-type="push" data-device="AvReceiver" 
               data-set="remoteControl subwoofer-temporary-level -6" 
               data-icon="">-6</div></li>
      <li><div data-type="push" data-device="AvReceiver" 
               data-set="remoteControl subwoofer-temporary-level -2" 
               data-icon="">-2</div></li>
      <li><div data-type="push" data-device="AvReceiver" 
               data-set="remoteControl subwoofer-temporary-level 0" 
               data-icon="">0</div></li>
      <li><div data-type="push" data-device="AvReceiver" 
               data-set="remoteControl subwoofer-temporary-level +3" 
               data-icon="">2</div></li>
      <li><div data-type="push" data-device="AvReceiver" 
               data-set="remoteControl subwoofer-temporary-level +9" 
               data-icon="">9</div></li>
      <li><div data-type="push" data-device="AvReceiver" 
               data-set="remoteControl subwoofer-temporary-level +C" 
               data-icon="">12</div></li>
    </ul>
</div>
<div data-type="label" class="cell">Woofer</div>
</div>
</pre>

[[Datei:circlemenu_tabletUI.png]]


<div id="Beispiel_dimmer">'''Dimmer'''</div>

Dimmer Widget Beispiel für Philips Hue

Minimalvariante
<pre> 
<div data-type="dimmer" data-device="HUEDevice1"
        data-get-on="!off" data-get-off="off"
        data-set="pct"</div>
</pre>

Mit Anzeige der Dimstufe
<pre>
<div data-type="dimmer" data-device="HUEDevice1"
       data-get="onoff"
       data-get-on="1" data-get-off="0"
       data-set=""
       data-set-on="on" data-set-off="off"
       data-dim="pct">
</div>
</pre>

Dimmer Widget für MilightDevice

<pre>
<div data-type="dimmer"
  data-device="SonstWas"
  data-get="brightness"
  data-get-off="0"
  data-get-on="[1-9][0-9]*"
  data-set-on="on"
  data-set-off="off"
  data-dim="dim"
  data-min="0"
  data-max="100"
></div>
</pre>


<div id="Beispiel_homestatus">'''Homestatus'''</div>

Beispiel rechts im Bild:
<pre>
<div data-type="homestatus" data-device='dummy1'
       data-get-on='["1","2","3","4"]'
       data-alias='["Home","Night","Away","Holiday"]'
       data-icons='["fa-home","fa-bed","fa-car","fa-suitcase"]'>
</div>
</pre>

Beispiel links im Bild:
<pre>
<div data-type="homestatus" data-device='dummy1'
        data-get-on='["home","asleep","absent","gone","gotosleep"]'
        data-alias='["Home","Night","Away","Holiday","Retire"]'
        data-icons='["fa-fire","fa-film","fa-plus","fa-car","fa-tint"]'
        data-version='residents'>
</div>
</pre>

[[Datei:homestatus_tabletUI.png]]



<div id="Beispiel_image">'''Image'''</div>


Erzeugt ein Widget mit einem Bild aus dem www, das alle 5 Sekunden aktualisiert wird (hier eine Wetterkarte vom DWD).

<pre>
<div data-type="image"
     data-size="80%"
     data-url="http://www.dwd.de/wundk/wetter/de/Deutschland.jpg"
</div>
</pre>

[[Datei:image_tabletUI.jpg]]


Example for how to add an image to the dashboard which its URL is delivered by a Fhem module like PROPLANTA:

<pre>
<div data-type="image" data-device="Wetter1" 
     data-get="fc0_weatherDayIcon" 
     data-size="40px" 
     class="cell">
</div>
</pre>


<div id="Beispiel_label">'''Label'''</div>

Example for HM-WDS40-TH-I Funk-Temperatur-/Feuchtesensor innen

<pre>
STATE   T: 20.0 H: 61
</pre>
<pre>
<div data-type="label" data-device="THSensorWZ" 
     data-part="2" data-unit="%B0C%0A" class="cell big"></div>
<div data-type="label" class="cell">Temperatur</div>
<div data-type="label" data-device="THSensorWZ" data-part="4" 
     data-unit="%" class="cell big"></div>
<div data-type="label" class="cell">Luftfeuchte</div>
</pre>

But the same result can reached by getting single readings:
<pre>
humidity    58
temperature 20.1
</pre>

<pre>
<div data-type="label" data-device="THSensorWZ" 
     data-get="temperature" data-unit="%B0C%0A" class="cell big"></div>
<div data-type="label" class="cell">Temperatur</div>
<div data-type="label" data-device="THSensorWZ" 
     data-get="humidity" data-unit="%" class="cell big"></div>
<div data-type="label" class="cell">Luftfeuchte</div>
</pre>

Example for how to influence the color of the label according to value limits
<pre>
<div data-type="label" 
     data-device="OutTemp" 
     data-limits='[-73,10,23]' 
     data-colors='["#6699FF","#AA6900","#FF0000"]' 
     data-unit="%B0C%0A" 
     class="cell big">
</div>
</pre>

Example for how to create a widget for shutter via push: show state and set up/down
<pre>
<div data-type="switch" 
     data-device="wzRollo" 
     data-get-on="up" 
     data-get-off="down" 
     data-icon="fa-bars" 
     class="cell" >
</div>
<div data-type="label" 
     class="cell">Rollo</div>
</pre>

Example for how to create a label for a time value in short format with usage of RegEx.

<pre>
<div data-type="label" 
     data-device="dummy1" 
     data-part="(\d\d\.\d\d\.).*" 
     class="cell">
</div>
</pre>

Example for how to show two labels in one line.

<pre>
<div class="">
   <div type="label" device="OnSunrise" class="inline"></div>bis
   <div type="label" device="OnSunset" class="inline"></div>
</div>
</pre>

Beispiel für die Anzeige des UV-Indexes und der Abhängigkeit der anzuzeigenden Farbe.

<pre>
   <div data-type="label" class="wider cell bigger" data-device="ProVorhersage"
        data-get="fc0_uv"
        data-limits="[-2, 2, 5, 7, 10]" 
	data-colors='["#66FF33","#FFFF00","#FF6600","#FF0000","#993399"]'></div>
   <div data-type="label" class="cell" data-device="ProVorhersage" data-get="fc0_date"></div>
   <div data-type="label" class="wider cell bigger" data-device="ProVorhersage"
        data-get="fc1_uv"
	data-limits="[-2, 2, 5, 7, 10]"
	data-colors='["#66FF33","#FFFF00","#FF6600","#FF0000","#993399"]'></div>
   <div data-type="label" class="cell" data-device="ProVorhersage" data-get="fc1_date"></div>
</pre>

[[Datei:label_tabletUI.jpg]]

Beispiel für die Anzeige des Labels als Icon.
<pre>
    <div class="cell">
    <div data-type="label" data-device="AvReceiver" data-get="input" class="icon round bg-red cell"></div>
    <div data-type="label" data-device="AvReceiver" data-get="input" class="icon square bg-blue cell"></div>
    <div data-type="label" data-device="AvReceiver" data-get="input" class="icon squareborder cell"></div>
    <div data-type="label" data-device="PowerAV_Sw" data-colors='["red","green"]' data-limits='["off","on"]' class="icon round bg-limit cell"></div>
</div>
</pre>

[[Datei:Label_tabletUI_icon.png]]

<div id="Beispiel_pagetab">'''Pagetab'''</div>

Example for a tab menu to switch smoothly between multiple pages. Multiple pagetabs in a template file: menu.html

<pre>
<html>
<body>
    <header>MENU</header>
    <div class="cell">
        <div data-type="pagetab" data-url="index.html"  data-icon="fa-home" class="cell"></div>
        <div data-type="pagetab" data-url="index_2.html" data-icon="fa-sliders" class="cell"></div>
        <div data-type="pagetab" data-url="index_3.html" data-icon="fa-music" class="cell"></div>
        <div data-type="pagetab" data-url="index_4.html" data-icon="fa-hotel" class="cell"></div>
        <div data-type="pagetab" data-url="index_5.html" data-icon="fa-music" class="cell"></div>
        <div data-type="pagetab" data-url="index_6.html" data-icon="fa-database" class="cell"></div>
        <div data-type="pagetab" data-url="index_7.html" data-icon="fa-fax" class="cell"></div>
    </div>
</body>
</html>
</pre>


<div id="Beispiel_playstream">'''Playstream'''</div>

Erzeugt einen Knopf zum direkten Abspielen eines Webradio-Streams.

<pre>
     <div data-type="playstream" data-url="http://radioeins.de/stream"></div>
     <div data-type="label" class="darker">Radio eins</div>
</pre>


<div id="Beispiel_push">'''Push'''</div>

Example for how to create a push button widget to trigger all devices on:

<pre>
<div data-type="push" 
     data-device="LightAll" 
     data-cmd="trigger" 
     data-set="on" 
     class="cell">
</div>
</pre>


Beispiel für zwei horizontale Buttons:

<pre>
<div class="cell">
    <div class="doublebox-h">
        <div data-type="push" data-device="Rollo" 
             data-icon="fa-angle-up" data-background-icon="fa-square-o" 
             data-set="up">
        </div>
        <div data-type="push" data-device="Rollo" 
             data-icon="fa-angle-down" data-background-icon="fa-square-o" 
             data-set="down">
        </div>
    </div>
</div>
</pre>

[[Datei:push1.png]]


Beispiel für zwei quadratische vertikale Buttons:

<pre>
<div class="cell">
    <div class="doublebox-v">
        <div data-type="push" data-device="Rollo" 
             data-icon="fa-chevron-up" data-background-icon="fa-square-o" 
             data-set="up">
        </div>
        <div data-type="push" data-device="Rollo" 
            data-icon="fa-chevron-down" data-background-icon="fa-square-o" 
            data-set="down">
        </div>
    </div>
</div>
</pre>

[[Datei:push2.png]]


<div id="Beispiel_rotor">'''Rotor'''</div>

Example for a rotor widget, which switches between to days of weather forecast

<pre>
<div data-type="rotor" class="fade">
 <ul>
  <li>
    <div data-type="label" class="darker">Heute</div>
    <div data-type="weather" data-device="AgroWeather" data-get="fc0_weatherDay" class="big"></div>
    <div data-type="label" data-device="AgroWeather" data-get="fc0_weatherDay" class=""></div>
    <div data-type="label" data-device="AgroWeather" data-get="fc0_tempMax" data-unit="%B0C%0A" class="large"></div>
  </li>
  <li>
    <div data-type="label" class="darker">Morgen</div>
    <div data-type="weather" data-device="AgroWeather" data-get="fc1_weatherDay" class="big"></div>
    <div data-type="label" data-device="AgroWeather" data-get="fc1_weatherDay" class=""></div>
    <div data-type="label" data-device="AgroWeather" data-get="fc1_tempMax" data-unit="%B0C%0A" class="large"></div>
  </li>
 </ul>
</div>
</pre>



<div id="Beispiel_select">'''Select'''</div>

Erzeugt zwei Comboboxen zur Auswahl des Eingang eines 2-Zonen-AV-Receivers. Die Liste für Zone2 ist fest, die Liste für Zone1 wird von Fhem übergeben.

<pre>
<div class="cell wider">
          <div data-type="label" class="inline wider">Zone2</div>
          <div data-type="select" data-device="AvReceiverZ2" data-items='["Airplay","Webradio","BD/DVD","PHONO"]' data-get="input" data-set="input" class="cell w2x" ></div>
          <div></div>
          <div data-type="label" class="inline">Zone1</div>
          <div data-type="select" data-device="AvReceiver" data-list="inputs" data-get="input" data-set="input" class="cell w2x" ></div>
</div>
</pre>

[[Datei:select_tabeltUI.png]]


<div id="Beispiel_slider">'''Slider'''</div>


Slider mit einstellbaren Werten von 10 bis 90:

<pre>
<div data-type="slider" 
     data-device='Dummy1' 
     data-min="10" 
     data-max="90" 
     class="cell" >
</div>
<div data-type="label" class="cell">Light1</div>
</pre>

[[Datei:slider_tabletUI.png]]


Horizontal angeordneter Slider:

<pre>
<div data-type="slider"
     data-device='Dummy1' 
     data-min="0" 
     data-max="100" 
     class="horizontal" 
</div>
</pre>

[[Datei:slider_tabletUI2.jpg]]


<div id="Beispiel_switch">'''Switch'''</div>

Schalter. Usage of RegEx pattern for state request:

<pre>
<div data-type="switch" class="cell" 
            data-device="MILIGHT_Zone1_Wohnzimmer" 
            data-get-on="on.*"
            data-get-off="off"></div>
</pre>

[[Datei:switch.png]]

Beispiel für eine Gruppe von Schaltern, um zwischen vier verschiedenen Werten eines device umzuschalten:

<pre>
<div class="cell left">
 <div data-type="switch" data-device="dummy1" 
      data-get-off="((?!Wert1).)*" 
      data-get-on="Wert1" class="cell" ></div>
 <div data-type="label" class="cell">Wert1</div>
 <div data-type="switch" data-device="dummy1" 
      data-get-off="((?!Wert2).)*" 
      data-get-on="Wert2" class="cell" ></div>
 <div data-type="label" class="cell">Wert2</div>
 <div data-type="switch" data-device="dummy1" 
      data-get-off="((?!Wert3).)*" 
      data-get-on="Wert3" class="cell" ></div>
 <div data-type="label" class="cell">Wert3</div>
 <div data-type="switch" data-device="dummy1" 
      data-get-off="((?!Wert4).)*" 
      data-get-on="Wert4" class="cell" ></div>
 <div data-type="label" class="cell">Wert4</div>
</div>
</pre>

[[Datei:switch4.png]]


<div id="Beispiel_symbol">'''Symbol'''</div>

Example for a tristate icon

<pre>
<div data-type="symbol" data-device="dummy1" 
     data-get-on='["wert1","wert2","wert3"]' 
     data-icons='["fa-arrow-up","fa-user","fa-arrow-down"]' 
     data-on-colors='["SeaGreen","SlateBlue","IndianRed"]' 
     class="cell big">
</div>
</pre>


Example for a tristate icon with blink and spin animation

<pre>
<div data-type="symbol" data-device="dummy1" 
     data-icons='["fa-exclamation-triangle fa-blink","fa-exclamation-circle","fa-cog fa-spin"]' 
     data-on-colors='["Crimson","GoldenRod","SeaGreen"]' 
     data-get-on='["Wert1","Wert2","Wert3"]' >
</div>
</pre>


Example for a battery level control with RegEx

<pre>
<div data-type="symbol" data-device="BadHeizung" data-get="batteryLevel"
     data-icons='["oa-measure_battery_100","oa-measure_battery_75","oa-measure_battery_50","oa-measure_battery_25","oa-measure_battery_0"]'
     data-get-on='["3\\.[0-9]","2\\.[789]","2\\.[456]","2\\.[123]","((2\\.0)|([01]\\.[0-9]))"]'
     data-on-colors='["#505050","#505050","#505050","#ad3333","#ad3333"]'>
</div>
</pre>



Example for a battery level control with greater-equal compare and 90° rotated symbols

<pre>
<div data-type="symbol" data-device="BadHeizung" data-get="batteryLevel"
    data-icons='["oa-measure_battery_0 fa-rotate-90","oa-measure_battery_25 fa-rotate-90","oa-measure_battery_50 fa-rotate-90","oa-measure_battery_75 fa-rotate-90","oa-measure_battery_0 fa-rotate-90"]'
    data-get-on='["0","2","2.4","2.7","3.0"]'
    data-on-colors='["#ad3333","#ad3333","#505050","#505050","#505050"]'>
</div>
</pre>


<div id="Beispiel_thermostat">'''Thermostat'''</div>

Configure as data-device='...' that item which delivers temp and desired-temp as reading.

Default parameters are:
<pre>
data-get="desired-temp" data-temp="measured-temp" data-set="desired-temp"
</pre>

Therefor for HomaMatic HM-CC-RT-DN this is sufficient.

<pre>
<div data-type="thermostat" data-device='KH_Clima' class="cell"></div>
</pre>

The long format looks like this:

<pre>
<div data-type="thermostat" 
     data-device="KH_Clima" 
     data-get="desired-temp" 
     data-temp="measured-temp" 
     class="cell">
</div>
</pre>


Example for MAX!:
<pre>
<div data-type="thermostat" data-device="HZ_Tuer" 
    data-valve="valveposition" 
    data-get="desiredTemperature" 
    data-temp="temperature" 
    data-set="desiredTemperature" 
    class="cell">
</div>
</pre>

The wigets will show the valve value only in case of a valid data-valve attribute. The default for data-valve ist null. That means, a empty data-valve attribute hides the valve label for the widget.

[[Datei:thermostat.png]]


<div id="Beispiel_weather">'''Weather'''</div>

Das Widget fügt ein dem Wetter entsprechendes Bild ein. Die Daten können durch Fhem-Module wie [[PROPLANTA]], [[OPENWEATHER]] und [[Weather]] bereitgestellt werden. 
Add 'big' or 'bigger' to CSS class to get a bigger weather icon.

Beispiel:
<pre>
<div data-type="weather" 
     data-device="Weather" 
     data-get="fc0_weatherDay" 
     class="cell big">
</div>
</pre>

[[Datei:weather.png]]

== Icon-Konfiguration ==

* Eingebaute Icons: Diese haben das ftui-Präfix. Zurzeit sind folgende verfügbar: ftui-window, ftui-door

* Mehr als 500 Icons von "http://fortawesome.github.io/Font-Awesome/icons" verfügbar. Einfach den Icon-Namen angeben (Präfix "fa-" nicht vergessen, Z.B. <code>data-icon="fa-volume-up"</code>

* Es stehen auch Openautomation Font-Files zur Verfügung. Wer sie nutzen möchte, muss folgende Stylesheets in die index.html hinzufügen.
<pre>
   <link rel="stylesheet" href="/fhem/tablet/lib/openautomation.css" />
   <link rel="stylesheet" href="/fhem/tablet/lib/fhemSVG.css" />
</pre>

Diese font icons haben das Präfix 'fs-' bzw. 'oa-'.

Beispiel bei einem Schalter:
<pre><div data-type="switch" data-device='dummy1' data-icon="oa-secur_locked"></div></pre>


Und so als großes Symbol:
<pre>
<div data-type="symbol" data-device='dummy1'
        data-icon="oa-status_frost"
        data-on-color="#bb3232"
        data-get-on="on"
        data-get-off="!on"
        class="bigger">
</div>
</pre>


Die Icons kann man auch etwas dicker darstellen mit den Zusatz bold: <code>data-icon="oa-secur_locked bold"</code>


Die Namen der verfügbaren Icons findet man auch in den CSS Files (openautomation.css / fhemSVG.css)

== Spezial ==
Folgender Befehl setzt einen direkten Befehl an Fhem ab (<code>set dummy1 off</code>):
<pre>
     <div onclick="setFhemStatus('set dummy1 off')">All off!</div>
</pre>



== FAQ ==
Häufig gestellte Fragen zum FHEM Tablet UI sind in der [[FHEM_Tablet_UI/FAQ|FHEM Tablet UI FAQ]] zusammengestellt.

== Links ==
* [http://forum.fhem.de/index.php/topic,34233.0.html Forums-Beitrag]
* [https://github.com/knowthelist/fhem-tablet-ui Projekt auf Github]
* [http://forum.fhem.de/index.php/topic,37378.0.html User-Demos]
* [https://github.com/ovibox/fhem-ftui-user-demos Download der User-Demo-Dateien]

[[Kategorie:FHEM Frontends]]